| After-sales Service: | 24 Hours Service |
|---|---|
| Warranty: | 1 Year |
| Application: | Metal |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This machine tool is a device for processing cylindrical deep hole parts such as various hydraulic cylinders, spindle holes, cylinder holes, and cooling holes. It can not only drill and bore holes, but also perform rolling processing. Drilling adopts the internal chip removal BTA drilling method, and the oiler supplies oil. Through the cutting area, the chips are discharged from the inside of the drill rod to the chip removal bucket at the end of the drill rod. Boring adopts the push boring method, and the oiler supplies oil. The oil carries the chips forward and is discharged from the chuck body at the spindle end of the bed head; rolling processing adopts a single rolling method. After rolling, the surface roughness can reach Ra0.8~Ra0.4um. The top tightening of the workpiece and the clamping of the oiler are both hydraulically controlled, which is safe, reliable and easy to operate. The machine tool can also be equipped with a drill rod box to meet different processing requirements. This machine tool is a series of products, and various deformation products can also be provided according to user need
| Technical specifications | Parameter | |
|
T2112 T2112/1
|
||
| The scope of work | Maximum boring diameter |
φ120mm
|
| Drilling diameter range |
φ15~φ60
|
|
| Maximum boring depth |
1000mm~3000mm
|
|
| Center frame supporting diameter range |
φ20~φ180
|
|
| Spindle | Spindle center height |
250mm
|
| Headstock spindle bore |
φ65mm
|
|
| Spindle front end taper hole |
φ80mm 1:20
|
|
| Spindle speed range |
81~1250r/min
|
|
| Feed | Feed speed range (stepless) |
5~1000mm/min
|
| Fast moving speed of carriage |
2000mm/min
|
|
| Motor | Main motor power |
15kW
|
| Hydraulic pump motor power |
1.5kW
|
|
| Power of carriage feed motor |
4.5kW
|
|
| Cooling pump motor power |
5.5kW 7.5kW
|
|
| Drill rod box | Drill box speed |
100~1200r/min
|
| Drill box motor power |
11KW
|
|
| Drill box spindle bore |
φ53mm
|
|
| Other | Cooling system rated pressure |
6.3MPa
|
| Cooling system flow |
80,180,280L/min
|
|
| Rated working pressure of hydraulic system |
6.3MPa
|
|
){kind=link}